Everybody that loves their car usually has a wash and detail routine for it. After all, we want to keep it looking its best.
The point of this post is not an end-all be-all of car detailing. For that, you should head over to AMMO NYC and watch Larry Kosilla do this thing.
But there are a few special tips that will help get the most out of your shoot, whether you’re the client or the photographer.
#1 – Leave it dirty if you can’t wash it
It’s always best to wash your car before the shoot, but if you can’t don’t worry.
Truth be told, the camera has a hard time picking up dust, and although a coating of it can dull the paint, we can bring the color back with a boost of saturation in post.
The problem comes up if you bring some spray wax and start going to town right before we shoot. You will undoubtedly miss a spot or 2, and then you’ll notice through the lens. Those dirt patches are much harder to mask in post production.
If you simply “must” clean the car, use a product like AMMO FROTHE, which will safely clean the paint and make it much harder for you to miss any spots. Never use spray wax alone.
#2 – Beware tire shine
Two reasons. First, tire shine is by nature, sticky. If you apply it after you wash, then drive to your location for shooting, you’ll undoubtedly sling the goop all over the wheel and paint. It also makes brake dust stick to the wheel much easier.
Second, depending up lighting, hot spots can show up in the tire because it’s so shiny. So don’t slather it on like butter. Use a thin film and a tire shine applicator to bring out the black. If it’s to much, rub it in with a terry cloth towel to even it out.
#3 – Clean the glass
One thing I do encourage on location is to clean the glass. Because you can see right through it to the interior, any stain, spec, and dot will show up in the lens. Save yourself the headache and give all the glass a good wipe down before you shoot.
#4 – Bring the right tools
I make it a policy to never touch a client’s car unless they specifically ask for it and you are insured. Regardless, you should always come prepared with the following tools
- Clean Microfiber towels
- Spray Wax
- Waterless Wash
- Glass cleaner
- General purpose tool like a Leatherman, to remove plates
- Empty bag for dirty rags
#5 – Know when to use a professional
If you’re shooting your own car, or a friend’s, by all means, use your own hands and have fun! But, if you’ve got a shoot with a Ferrari F40 lined up, you might want to call in a professional detailer. I worked with Dan from Turn 7 Auto Care on the Camry shoot, and his experience paid dividends when it came time to shoot, in both time saved and effects needed. Just work out the rate beforehand, so you can give an accurate estimate to your client.
Do these things, and your shoot will go much smoother overall. Have fun!
Feel free to email me at email@example.com with any questions.
Follow along on Instagram @machineswithsouls
Due to factors beyond the control of Machines With Souls LLC and Mike D’Ambrosio, I cannot guarantee against improper use or unauthorized modifications of this information. Machines With Souls LLC and Mike D’Ambrosio assumes no liability for property damage or injury incurred as a result of any of the information contained in this post. Use this information at your own risk. Machines With Souls LLC and Mike D’Ambrosio recommends safe practices when working on vehicles and or with tools seen or implied in this post. Due to factors beyond the control of Machines With Souls LLC and Mike D’Ambrosio, no information contained in this post shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this post is the sole responsibility of the user and not Machines With Souls LLC or Mike D’Ambrosio.